Search results for "thermal [radiation mechanism]"
showing 10 items of 2571 documents
Tuning the Properties of Photonic Films from Polymer Beads by Chemistry
2002
This paper describes the preparation of monodisperse colloids from various methacrylates. These colloids sediment well on glass slides and formin the dried statelarge three-dimensional face-centered cubic photonic crystal films with Bragg reflection in the visible region. Depending on crystallization conditions, the domain sizes vary between 50 and 300 μm. By cross-linking the polymer within the colloids, it is possible to increase the thermal stability of the polymeric photonic structure tremendously (up to 1 h at 200 °C). These photonic structures soften above Tg (rubbery photonic structure), but they cannot fuse. Cross-linked colloids from poly(tert-butyl methacrylate) can either thermal…
QENS investigation of filled rubbers
2002
The polymer segmental dynamics is investigated in a series of silica-filled rubbers. The presence of inert fillers in polymers greatly affects the mechanical and physical performance of the final materials. For example, silica has been proposed as a reinforcing agent of elastomers in tire production. Results from quasielastic neutron scattering and Dynamic Mechanical Thermal Analysis (DMTA) measurements are presented on styrene–ran-butadiene rubber filled with silica. A clear indication is obtained of the existence of a bimodal dynamics, which can be rationalized in terms of the relaxation of bulk rubber and the much slower relaxation of the rubber adsorbed on the filler surface.
Laponite clay in homopolymer and tri-block copolymer matrices
2007
Macromolecule/laponite nanomaterials were studied by DSC and X-ray diffraction techniques. The matrices are poly(ethylene) glycols at various molecular masses and poly(ethylene oxides)-poly(propylene oxides)-poly(ethylene oxides) tri-block copolymers. The latter were tuned by modulating the molecular masses, at constant hydrophilic/hydrophobic ratio, and the hydrophilicity. For all the investigated systems, the enthalpy of melting (ΔH m) is nearly constant up to a given composition thereafter it increases monotonically reaching the value of the pure macromolecule. We proposed a model to interpret the DSC data. Briefly, it was invoked a mechanism of interaction following which some segments …
A Quantitative Analysis of the Thermoelastic Effect in CFRP Composite Materials
2010
: In this study the thermoelastic signal from carbon fibre-reinforced plastic (CFRP) laminates is investigated. A comparison between the theoretical and experimental values of the thermoelastic signal is reported, with the theoretical predictions obtained from two different quantitative models. These models are based on the classic thermoelastic effect law extended to the case of orthotropic materials (by using the mesomechanical or bulk approach), and the modified law assuming that the surface resin-rich layer behaves as a strain witness of the laminate. It is found that the theoretical predictions of the two models can be strongly and differently influenced by the intrinsic orthotropy of…
Synthesis and thermal behavior of Janus dendrimers, part 2
2010
Abstract The thermal properties of twelve Janus-type dendrimers up to the second generation were evaluated by termogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Compounds consist of the dendritic bisMPA based polyester moieties, and either 3,4-bis-dodecyloxybenzoic acid, 3,5-bis-dodecyloxybenzoic acid or 3,4,5-tris-dodecyloxybenzoic acid moieties, attached to opposite sides of the pentaerythritol core. The thermal stability of the compounds was evaluated by TGA, displaying onset decomposition temperatures ( T d ) at around 250 °C. DSC measurements upon heating and cooling confirmed that OH terminated Janus dendrimers featuring large polarity difference in opposite …
Different kinds of solid solutions in the V2O5-ZrSiO4-NaF system by sol-gel processes and their characterization
1993
Abstract In the V2O5-ZrSiO4-NaF system, three kinds of substances have been identified by sol-gel methods depending on the V2O5 amounts in the composition. Their characterization by X-ray diffraction, measurements of unit cell parameters, UV-visible (UV-V) spectroscopy, differential thermal analysis and lab colour parameter determination allow the consideration of three kinds of solid solution in the zircon lattice: (a) V+5,V+4-ZrSiO4, thermally stable and with a deep green colour; (b) V+4-ZrSiO4, thermally stable and blue coloured, made by the sol-gel method and with V2O5 amounts lower than 0·03 mol per formula weight; and (c) Na+,F−,V+4-ZrSiO4, a solid solution with a deep blue-turquoise …
Novel cuprous oxide morphologies using amino acids and carboxylic acids as structure directing agents in a simple hydrothermal method
2021
Abstract The reactivity and catalytic performance of cuprous oxide (Cu2O) particles rely on the size and morphology of the Cu2O crystals. In this study, a facile and mild hydrothermal route is applied to generate novel uniform cuprous oxide microcrystals, using non-toxic and low-cost carboxylic acids (O,O-type) and amino acids (N,O-type) as structure directing agents. N,O-type complexing agents showed a higher ability to reduce the copper species compared to the O,O-type ligands. Using oxalate and citrate complexes, pure Cu2O was obtained after 4 h at 200 °C, whereas the oxalate-based complex leads to the morphology of uniformly stepped microcubes, the citrate complex as precursor leads to …
Influence of the modification, induced by zirconia nanoparticles, on the structure and properties of polycarbonate
2013
Melt compounding was used to prepare polycarbonate (PC)–zirconia nanocomposites with different amounts of zirconia. The effect of the zirconia loading, in the range of 1–5 wt.%, on the structure, mechanical properties and thermal degradation kinetics was investigated. The zirconia nanoparticle aggregates were well dispersed in the PC matrix and induced the appearance of a local lamellar order in the polycarbonate as inferred by SAXS findings. This order could be a consequence of the intermolecular interactions between zirconia and the polymer, in particular with the quaternary carbon bonded to the methyl groups and the methyl carbon as inferred from the NMR results. The presence of zirconia…
Artificial Opals as Effect Pigments in Clear-Coatings
2004
In this paper, we describe the use of artificial opals from polymer beads as effect pigments in transparent industial and automotive coatings. For this purpose, we synthesized monodisperse colloids from fluorinated methacrylates by surfactant-free emulsion polymerization. The fluorinated monomers, in combination with crosslinking, lead to a refractive index contrast, thermal stability, and solvent resistivity necessary for use as effect pigments. After crystallization of the monodisperse polymer beads, crystal flakes with iridescent colors can be obtained. The crystal flakes can act as effect pigments in various transpartent industrial and automotive coatings. due to photonic crystal behavi…
Dependence of Coefficient of volumetric thermal expansion (CVTE) of glass fiber reinforced (GFR) polymers on the glass fiber content
2007
In a Glass Fiber Reinforced (GFR) polymer, the coefficient of volumetric thermal expansion CVTE (determined as a sum of the coefficients of linear thermal expansion CLTE’s for the three principal directions) is sometimes much smaller than the value predictable on the basis of well acquainted models, such as Chow model, taking into account fibers anisotropy and aspect ratio.